The cyclone dust collector has the characteristics of filtration materials. New filtering materials (waterproof, moisture-proof, anti-wear and anti-corrosion), new structure (folding arrangement of hard filtering materials, no steel frame, no wear phenomenon of filtering materials), new theory (surface filtering replaces deep filtering dust and no longer penetrates into filtering materials). Over the years, the United States, Germany, Australia and other countries have eliminated reverse dust collectors such as recoil, gas tank pulse purging and mechanical vibration units. The cyclone dust collector is a substitute for these old dust collectors. The advantages are as follows:

The dust removal efficiency of cyclone dust collector is much higher than that of old type dust collector, which greatly reduces the discharge of harmful substances. The air purification index has reached the world advanced level, which has completely changed the backward state that the old dust collector cannot meet the requirements.

The cyclone dust collector shows no wear of filter materials and has no movable parts on the body. It can be used for a long time without maintenance (even if the filter element is replaced), which saves money and time by avoiding the trouble of replacing the filter material of the old type of dust remover. Labor-saving, no secondary pollution. The cyclone dust collector is much smaller than the old dust collector of the same specification, which saves the space and load of civil buildings and a large amount of capital investment.

1. Dust baffler is set at the dust inlet of cyclone dust collector, which has buffering and wear resistance effect, so that dust is not directly impacted on the filter cartridge at high speed, thus extending the service life of the filter cartridge.

2. Filter cartridge 15° inclined drawer-type installation, can make the filter cartridge more convenient to remove and replace, and the dust collector body is not equipped with transmission parts, so that its maintenance work is reduced very little. For ordinary dust, the filter cartridge can be used for a long time without replacement, which saves the tedious work of frequently changing and washing the filter bag for the common bag filter, and saves a lot of maintenance cost.

3. The advanced sink flow layout and inclined structure of filter barrel are adopted, so that the dust collector has a good effect of synchronous ash cleaning in the working process.

4. High purification efficiency, 99.9% of dust above submicron, low resistance to equipment operation, effectively saving energy consumption of dust removal system.

5. Modular combination, the size of which can be selected at will, can expand the original combination and increase the dust removal unit, without making too many changes to the original equipment.